Place of Origin:
DONGGUAN, CHINA
Brand Name:
NOXIN
Certification:
CE
Model Number:
NFL(R)J-30
The heavy-duty copper tube air-cooled packaged DX air conditioner is a direct-expansion climate unit engineered for factories, equipment rooms, data halls, supermarkets and mid-size clean spaces that cannot justify a chilled water plant. Refrigerant is metered straight into a copper tube coil, where it evaporates and absorbs heat from the air stream — there is no intermediate water circuit to pump, treat or winterize. The compressor, condenser, evaporator, centrifugal fan and control panel are assembled on a single packaged chassis and delivered ready for duct connection.
The platform is deliberately broad. Cooling capacity spans 12 kW to 392 kW (approximately 3 Ton to 110 Ton), and every model shares the same control philosophy, coil technology and service access. A plant engineer specifying a 15 kW equipment room and a 300 kW workshop ends up with one maintenance routine, one spare-parts list and one operator interface instead of three unrelated systems.
| Model | NFL(R)J-30 (platform) |
|---|---|
| Type | Air-cooled packaged DX air conditioner |
| Cooling Capacity | 12 kW – 392 kW (3 Ton – 110 Ton), customizable |
| Function | Cooling only / heat pump (cooling + heating) |
| Power Supply | 380–415V / 3Ph / 50Hz (220V/60Hz customizable) |
| Compressor | Hermetic scroll compressor |
| Expansion Device | Electronic expansion valve (EEV) |
| Heat Exchanger | Copper tube + hydrophilic aluminum fin |
| Fan Type | Centrifugal fan, belt or EC drive |
| Air Flow | 5000 m³/h (2960 CFM), customizable |
| Noise Level | 37 – 54 dB(A) |
| Cabinet | Galvanized steel with polyester powder coating |
| Refrigerant | R410A / R407C / R22 (R32 optional) |
| Mounting | Floor standing / ceiling mounted / horizontal |
| Certification | CE, RoHS, ISO 9001, ISO 14001 |
| Warranty | 1 year |
Packaged DX units of this class are typically specified for the following environments:
Because the chassis can be configured as floor-standing, ceiling-mounted or horizontal, it fits buildings that were never designed around an HVAC plant room. Because it can be coupled to a fresh-air section, it delivers tempered outdoor air instead of recirculating stale air.
Every unit is assembled, wired and pressure-tested, then run continuously for 48 hours with a refrigerant leak inspection before it leaves the line. Units ship in an export-standard wooden crate with the coil face protected, the refrigerant circuit sealed under holding charge, and lifting points clearly marked for forklift or crane handling. Each unit carries a 1 year warranty on quality and workmanship, and spare coils, fan motors, controllers and EEV assemblies are held as standard service items so field repair does not depend on a full-unit replacement.
Customization is routine rather than exceptional: non-standard supply voltages, alternative refrigerants, higher external static pressure, EC fan drives and custom cabinet paint colours can all be built to project specification. Share your cooling load, room dimensions, duct layout and voltage, and the engineering team will confirm the model, the airflow and the static pressure before production begins.
Send your inquiry directly to us